A warm and timeless interior refresh for the Michel family in Eagle, Idaho

August 4, 2025

Spray ’n Coat Painting recently had the pleasure of working with Tamara Michel to refresh the interior of her beautiful family home in Eagle, Idaho. Like many of our customers, Tamara was referred by a friend who had recently completed a project with us—and we were honored to help her bring a new sense of light and warmth into her home.


Her walls were previously painted in a creamy yellow that had started to feel outdated and overly warm, especially alongside her natural wood cabinetry. After reviewing color options, Tamara chose one of our most recommended interior shades—Sherwin-Williams Alabaster (SW 7008)—to brighten and modernize the space while still complementing the home’s existing features.


Here’s What We Did:


We painted the walls throughout the main level using Sherwin-Williams Alabaster in a satin/eggshell finish, a choice that helped reflect natural light while maintaining a soft, elegant look. This project included the:


  • Living room

  • Kitchen and dining area

  • Hallways

  • Stairway

  • Powder bath

  • Laundry room

  • Master bedroom, bathroom, and water closet

Each room was carefully prepped and painted to create a clean, cohesive result that enhanced the natural beauty of the space without overwhelming it.


Why Alabaster Was the Perfect Fit


Alabaster is one of those rare paint colors that manages to be both warm and neutral at the same time. Named Sherwin-Williams Color of the Year in 2016, it has remained a best-seller thanks to its versatility and timeless appeal.


In Tamara’s case, Alabaster helped tone down the yellow hues in her natural wood cabinetry, something that the previous wall color had unintentionally amplified. The new wall color created a beautiful contrast that softened the overall look of the space while still feeling warm and welcoming.


Choosing Paint Colors That Work with Wood Tones


When working with natural wood cabinetry, trim, or flooring, it’s important to consider how paint undertones interact with those elements. Certain whites and neutrals can pull unwanted yellow or orange tones, depending on the surrounding materials.


Alabaster works particularly well in homes with stained wood because it doesn’t compete with those natural tones—it gently balances them. It’s just warm enough to blend, yet neutral enough to modernize, making it one of our most dependable choices for whole-home interior updates.


What the Homeowner Had to Say


“The entire process went amazingly from start to finish… Daryl gave me an estimate on the spot and was very forthcoming about pricing. Will and Jacob were my painters, and they showed up every day on time and did a great job on the house. They cleaned up every day when they left and really took pride in their work. The house looks amazing, and I couldn’t be happier with the process. This company was by far the easiest and most professional company I’ve worked with. I would highly, highly recommend them.”
Tamara Michel


Thank You to Tamara Michel!


We’re grateful to Tamara for trusting Spray ’n Coat Painting with her interior refresh. Projects like this are a great example of how the right color can dramatically improve a space without changing any of the foundational features.


If you’re ready to update your home’s interior with high-quality, professional painting services, reach out today to schedule your free on-site estimate. We proudly serve Eagle, Boise, Meridian, Nampa, and the entire Treasure Valley area.


Visitwww.sprayncoat.com to request your free quote today.

August 4, 2025
Spray ’n Coat Painting recently completed a wood door refinishing project for a homeowner in Middleton, Idaho. Over time, their beautiful solid wood front door had faded and weathered from sun exposure—something we see often across the Treasure Valley. But rather than replace the door, the homeowner reached out to us to restore its appearance and match the interior wood tones for a cohesive look inside and out. Here’s What We Did We began by carefully sanding the front door and surrounding trim to remove the worn finish and prepare the surface for new stain. Before proceeding with the full application, we tested a sample stain on a small section of the door to make sure it matched the interior tones. Once approved by the homeowner, we applied stain across the entire door surface while keeping the door in place. After allowing proper dry time, we returned to apply two coats of a UV-stable clear finish. This protective layer will help preserve the color, protect against sun damage, and keep the door looking beautiful for years to come. Why Staining Is Better Than Replacing Many homeowners assume a worn or faded door needs to be replaced—but most solid wood doors just need the right restoration process. Staining not only revives the wood’s natural beauty, but also allows you to better control color tone and finish. It’s a more sustainable and cost-effective way to maintain curb appeal and protect your home’s entryway. Our UV-stable clear coats are especially important in areas like Middleton, where intense sunlight can break down traditional sealants and finishes over time.
August 4, 2025
Commercial Interior Office Repaint for Datablaze
August 4, 2025
A commercial floor coating upgrade for one of Idaho’s most iconic performance venues
August 4, 2025
Exterior repairs and MultiSpec refinishing for The Sundance Company in Meridian
peeling epoxy floor coating
June 12, 2025
Learn why commercial epoxy floors peel and how to prevent costly failures. Discover key causes like moisture vapor pressure and poor prep—and how Spray 'n Coat Painting ensures long-lasting results.
photo of the Caldwell, Idaho airport terminal showing a grind and seal concrete floor
June 2, 2025
Compare grind and seal systems vs. polished concrete. Learn which floor coating works best for your commercial space in Boise, Nampa, or Meridian.
May 30, 2025
At Spray ’n Coat Painting, we often get called in to finish what others couldn’t quite get right—and that was the case with this 2,000 sq. ft. concrete floor coating project at the Caldwell Airport terminal. The building, now home to a private charter company, needed a durable and clean finish to make the space more welcoming for employees and travelers. Project Background This terminal originally had carpet in several areas, and after it was removed, thick glue residue was left behind across the concrete floors. Our customer had hired another contractor to handle the coating work, but unfortunately, they lacked the necessary equipment and experience for the job. That’s when we stepped in to get things done right. Our Process To give the customer the clean, sealed finish he was hoping for, our crew tackled the job in several key steps: Joint Filler Replacement: We started by removing the old joint filler and refilling the seams. Heavy Grinding & Surface Prep: Using professional grinding equipment, we stripped away all glue residue and opened up the pores of the concrete to ensure a strong bond. Matte Polyurethane Coating: We applied a commercial-grade polyurethane sealer in a matte finish. This not only improved the look of the space but also provided a stain-resistant, slip-resistant surface that can stand up to heavy foot traffic. Why It Matters For a commercial space like this—where first impressions matter and safety is non-negotiable—the right prep and coating system makes all the difference. The finished floor is now sealed, low-maintenance, and ready to take on day-to-day traffic from both staff and customers.
By Katherine Collins May 19, 2025
What is right for your project – wood stain vs. varnish? Discover the best uses for each in our guide, perfect for Boise, Meridian, and Nampa homeowners.
By Katherine Collins May 19, 2025
Discover the best wood stain colors for your surfaces. Find the perfect stain to transform your Boise, Meridian, or Nampa home.
Water-damaged wood cabinet showing peeling finish and bubbling from moisture exposure
May 15, 2025
Key Differences in How Moisture Affects Painted vs. Wood Cabinets
More Posts